This is a fully automatic IBC filling system.
No operator is necessary. Each IBC conveys into the fill station
then stops, signalling the lance to enter the container and
automatically tare the load.
This system allows several pallet loads of empty IBCs to accumulate
prior to the filling station. A powered roller conveyor is
on the scale and another is after the fill station for cap
& label application. There are additional conveyors after
to accumulate full loads.
Description of Operation
A forklift drops off empty IBCs to the infeed conveyor to accumulate.
When a full load is discharged, a new load conveys to the fill
station automatically.
The lance travels into the IBC to start the fill cycle.
Near the top, the machine cycles to dribble speed to top off
the IBC
This machine functions as an automatic filler as long as the
IBC size and bung opening are consistent for each fill cycle.
General Specifications
Automatic abort if lance is not aligned with bung opening
Two inch diameter product valves for faster flow rates
Quick change 2" diameter lance
Wetted parts are 304 stainless steel with Teflon seats &
seals
1500 Kg capacity scale base with four load cells
Fully welded structural steel frame
Air operated drip collector and Teflon wiper ring
Built in fume hood for vapor collection
PLC based weight controller & load cells
Dust proof standard enclosure, others optional
RS-232 port for optional data acquisition and printer connection
